Salli SIT HAPPY Instrucciones página 2

DISCLAIMER
The user shall determine the suitability of the Salli® Saddle Chair and its accessories for his or her intended use and
shall assume all risk and liability in connection therewith; this will include all items manufactured or distributed by
Easydoing Oy/Salli Systems ("Salli"). Easydoing cannot accept responsibility for injury and/or damage that occurs in
connection with the testing, trial use or regular use of the product except as provided for in mandatory law. Great care
should be taken when using the products and/or accessories related to product.
User is required to read all instruction manuals including these instructions of use before using the product and to
follow such instructions when using the chair.
Do noT USe The ProDUCT UnDer AnY oF The FoLLowInG CIrCUMSTAnCeS:
1. IF YOu gET ANY PELvIc, ExTrEMITY, bAck, Or OTHEr kINDS OF PAIN FrOM uSINg THE cHAIr (OTHEr THAN NOrMAL
MuScLE SOrENESS) AND THE PAIN DOES NOT PASS IN A FEw DAYS.
2. IF YoUr SenSe oF bALAnCe or MUSCLe ConTroL IS AbnorMAL or IMPAIreD For AnY reASon.
3. IF YoU USe MeDICATIon or DrUGS ThAT InTerFere wITh YoUr SenSe oF bALAnCe or MUSCLe ConTroL.
4. IF YoU Do noT or CAnnoT ADjUST YoUr workToP To A FUnCTIonAL heIGhT ThAT IS CoMPArAbLe wITh The
oPTIMAL heIGhT oF The SALLI SADDLe ChAIr. The DeFInITIon oF The oPTIMAL heIGhT oF The TAbLe/work IS
DeSCrIbeD In The FoLLowInG InSTrUCTIonS.
Due to the danger of falling down do not use yourself or allow children or anyone else to use a product unless the
feet of the user reach the floor firmly when sitting down. For shorter users we recommend changing the gas cylinder
to a shorter model to ensure the safe use of the product. Gas cylinders are available from Salli and authorized
dealers, and the gas cylinder can be changed by Salli facility or an authorized dealer.
ASSEMBLING SALLI
1. Place the chair base on floor, with the castors against the floor (Picture 1).
2. Put the wider end of the gas cylinder into the hole in the base (Picture 2).
3. Put the slimmer end into the barrel under the seat (Picture 3). You may need to pump the
gas cylinder for a while in order to get it working properly.
Picture 1
SADDLE CHAIR ADJUSTMENT
Depending on the model, your Salli Saddle Chair is equipped with one or more of the following adjustments:
Professional / MultiAdjuster / Twin
As seen from behind the chair:
1. Height adjustment (all models)
2. Inclination adjustment *
3. Seat width adjustment (MultiAdjuster)
* Inclination adjustment: MultiAdjuster. Classic and Twin
seats are available both with or without inclination adjust-
ment. Salli Professional always without inclination.
2
2
Picture 2
3
1
Picture 3
The chair is now ready.
Swing / SwingFit
As seen from behind the chair:
1. Height adjustment (all models)
2. Swinging mechanism (cannot
be locked into any specific
position)
3. Seat width adjustment
(SwingFit)
3
2
1