Grohe 36 206 Manual De Usuario página 10

Set flush duration of automatic flushing
Factory setting: 5 mins.
Function Button
TEST
Initiation
Increase flush
duration
Reduce flush
duration
TEST
Finish
or after 60 s
Switching between usage-dependent/independent
flushing
Factory setting: usage-dependent
Flushing can be set dependent on or independent of the actual
usage.
Function Button
RESET
Initiation
Hold and
within 3 s:
OFF
AUTO
Switch on/off Within 10 s:
TEST
Finish Wait 10 s
This function is available for products with a manufacturing
date later than 01.02.2009.
7
Indicator lamp
Per stage
(1 min):
End position
(10 min):
Per stage
(1 min):
End position
(1 min):
Indicator lamp
.....
Usage-dependent:
Usage-independent:
Switch by pressing button
again
Functions for wash basin wall fittings
(only surface-mounted)
Changing type of detection
Factory setting: Start/stop by approaching sensor system with
the hands (3 to 7cm).
Stop additionally when person leaves the detection
zone (> 35cm).
Set detection zone
Function Button
Zoom area
Reduce area
Start/stop exclusively through approaching sensor
system with the hands
Function Button
Press until end
When end
position reached
The detection zone can be adapted, see Set detection zone.
Reset detection zone to factory setting
Press RESET for more than 3 seconds.
Start/stop only when a person enters and moves out of the
detection zone
Function Button
Press until end
When end
position
reached
The detection zone can be adapted, see Set detection zone.
Reset detection zone to factory setting
Press RESET for more than 3 seconds.
Indicator lamp
Per stage:
End position:
Per stage:
End position:
Indicator lamp
position reached:
Indicator lamp
position reached: