KENMORE ELITE 116.21814 Manual De Uso Y Cuidado página 14

CROSSOVER BARE FLOOR NOZZLE FAN TOOL
_kWARNING
Electrical Shock Hazard
To reduce the risk of electric shock - DO
NOT use on wet surfaces.
The floor brush is connected to the nozzle
for quick transitions from carpet to bare
floor cleaning.
NOTE: Turn off vacuum cleaner before
removing floor brush from PowerMate.
To remove the floor brush, press brush
release pedal on the PowerMate. Lift floor
brush out of PowerMate.
Brush
Release
To replace, insert the floor
brush into the PowerMate
until floor brush locks
into place.
The fan tool will
attach to the handle
or wand for over-
head cleaning of
furniture such as
cabinets and shelves.
1. Rotate the fan tool
and lock into place.
2. Attach the fan
tool to the handle or
wand.
WAND (TELESCOPING)
The wand length is
adjustable and
requires no assembly.
To adjust, simply
push on the wand
adjust button and
slide the upper wand
to the desired height.
Wand
Length
Adjust
Button_
NOTE: When
adjusting the wand
length you may have
to hold the
PowerMate with your
hand or foot.
WAND LIGHT
This vacuum cleaner is equipped with a
light on the extension wand. The light can
be used for lighting hard to reach
locations. The wand light will operate
only when the vacuum
Ill
cleaner is in CARPET
setting. The light will
operate when attached
or not attached to the Wand
PowerMate. Light--_
-44-