Home NetWerks 7130-02-BT Manual Del Usuario página 8

ASSEMBLY INSTRUCTIONS
2. Measure the opening to assure it is large
enough to accommodate the new fan
housing (9.4 in. x 9.4 in.).
3. If this fan is not replacing an old fan be sure
to cut a 9.4 in. x 9.4 in. opening for the fan
housing.
4. Insert suspension bracket onto fan housing
using suspension bracket I (C) and II (D). If
spacing between joists is 21.5 in. to 23.5 in.
attach suspension bracket III (E).
5. Position fan housing so edge of fan is flush
with sheetrock. Do not flush mount housing
with joist.
6. Secure the fan housing to joist with suspension
brackets using long wood screws (AA)
(included). (Joist spacing of less than 21.25 in.)
2
3
4
E
5
6
8
C
D
www.homewerksww.com