Bluetooth ® Speaker Fan Grille Installation - Home NetWerks 7130-02-BT Manual Del Usuario

ASSEMBLY INSTRUCTIONS
7. Secure the suspension bracket I (C) to fan
housing using short machine screw (BB)
(included).
8. Remove junction box cover. As shown in wiring
diagram on page 5, using quick connect ports
connect house wires to switch and fan.
Note: Do not use metal wall plate with the
switch, as it may cause interference with the
fan operation.
9. Connect a 4 in. circular duct and vent to the
outside. Secure it with duct tape or clamp
(not supplied).
Turn on power source. Test the fan.
BLUETOOTH SPEAKER FAN GRILLE INSTALLATION
®
Housing must be installed flush with ceiling board or the grille mounting spring will not be long
enough to insert into the slots inside the fan housing.
1. Join the connectors for the BLUETOOTH
speaker, power adapter and RF wall switch.
www.homewerksww.com
7
8
9
® 1
9
Wall
Green Wall switch
switch wire
back view
NIGHT LIGHT
Red
wire
White
wire
Black
wire