Hints For Best Results - Chef's Choice 609A Manual De Instrucciones

This Electric Food Slicer has been equipped with a protective
fuse to prevent the motor from overheating. In the unlikely event
that the fuse fails, a spare fuse has been supplied with your
slicer. To remove the old fuse, make certain that the Power
Switch is in OFF position, that the power cord has been
unplugged, that the thickness plate is in the "0" position and the
food carriage is locked in place. Turn the slicer over with the
motor cover resting on the table as shown (Fig. 10). The fuse
holder will be accessible. Unscrew the fuse holder, pull out the
old fuse and replace it with an approved new one. Reinsert the
holder with the new fuse into its proper location, press and
rotate to lock. Satisfactory replacement fuses are available from
Hollyland 51S, Schurter FST or Bussman GDCS505. All are
Slo-Blo type, rated at 1.25A and 250V.

HINTS FOR BEST RESULTS:

• To slice meats wafer thin, chill thoroughly before slicing.
• Meats should be boneless, fruits should be free of seeds.
• Foods with an uneven texture, like fish or steaks, are often difficult to slice. Partially freeze
before slicing.
• At canning time, use the slicer to quickly slice cucumbers and onions for attractive pickles...
apples for pies... vegetables for the freezer.
• For food dehydrators: produces thick or thin slices of uniform thickness for even dehydrating.
• Handy for slicing homemade or bakery bread: a great companion for your bread machine.
This appliance is for household use only. No user-serviceable parts are inside. In the event service
is needed, you may return your food slicer to EdgeCraft Corp., where the cost of repair or
electrical or mechanical adjustment can be estimated before the repair is undertaken. Please
include your return address and a brief description of the problem or damage to the slicer on a
separate sheet inside the box.
Send your slicer, insured and postage prepaid to:
825 Southwood Road, Avondale, PA 19311 U.S.A.
Retain evidence of shipping for your protection.
Limited Warranty: Used with normal care, this EdgeCraft product is guaranteed against defective material and
workmanship for a period of one (1) year from the date of original purchase ("Warranty Period"). We will repair
or replace, at our option, any product or part that is defective in material or workmanship without charge if
the product is returned to us postage prepaid with dated proof of purchase within the Warranty Period. This
warranty does not apply to commercial use or any product abuse. ALL IMPLIED WARRANTIES, INCLUDING
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
TO THE WARRANTY PERIOD. EDGECRAFT CORPORATION SHALL NOT BE LIABLE FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations on how long an implied warranty lasts
and some states do not allow exclusions or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This Limited Warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on the product.
Conforms to UL Std. 982 Certified to CAN/CSA Std. C22.2 No. 1335.2.14
© EdgeCraft Corporation 2019
C19
NOTICE:
SERVICE
EdgeCraft Corporation
Consumer Support 1-800-342-3255
E/F/S
English — 8
chefschoice.com
Figure 10. Replacing the
fuse located underneath
motor housing.
Printed in China.
S609503