Hints For Best Results - Chef's Choice 615A Manual De Instrucciones

Ocultar thumbs

Contenido

página de 25

/ 25
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

This Electric Food Slicer has been equipped with a protective

fuse to prevent the motor from overheating. In the unlikely event

that the fuse fails, a spare fuse has been supplied with your

slicer. To remove the old fuse, make certain that the Power

Switch is in OFF position, that the power cord has been

unplugged, that the thickness plate is in the "0" position and the

food carriage is locked in place. Turn the slicer over with the

motor cover resting on the table as shown (Fig. 10). The fuse

holder will be accessible. Unscrew the fuse holder, pull out the

old fuse and replace it with an approved new one. Reinsert the

holder with the new fuse into its proper location. Satisfactory

replacement fuses are available from Hollyland 5oT, LittelFuse

(Model 2181.25) or Bussman GDCS505.

•

To slice meats wafer thin, chill thoroughly before slicing.

•

Meats should be boneless, fruits should be free of seeds.

•

Foods with an uneven texture, like fish or steaks, are often difficult to slice. Partially freeze

before slicing.

•

At canning time, use the slicer to quickly slice cucumbers and onions for attractive pickles...

apples for pies... vegetables for the freezer.

•

For food dehydrators: produces thick or thin slices of uniform thickness for even dehydrating.

•

Handy for slicing homemade or bakery bread: a great companion for your bread machine.

This appliance is for household use only. No user-serviceable parts are inside. In the event service

is needed, you may return your food slicer to EdgeCraft Corp., where the cost of repair or

electrical or mechanical adjustment can be estimated before the repair is undertaken. Please

include your return address and a brief description of the problem or damage to the slicer on a

separate sheet inside the box.

Send your slicer, insured and postage prepaid to:

149 Cleveland Drive, Paris, KY 40361 U.S.A.

Retain evidence of shipping for your protection.

Limited Warranty: Used with normal care, this EdgeCraft product is guaranteed against defective material and

workmanship for a period of one (1) year from the date of original purchase ("Warranty Period"). We will repair

or replace, at our option, any product or part that is defective in material or workmanship without charge if

the product is returned to us postage prepaid with dated proof of purchase within the Warranty Period. This

warranty does not apply to commercial use or any product abuse. ALL IMPLIED WARRANTIES, INCLUDING

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED

TO THE WARRANTY PERIOD. EDGECRAFT CORPORATION SHALL NOT BE LIABLE FOR ANY INCIDENTAL

OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations on how long an implied warranty lasts

and some states do not allow exclusions or limitation of incidental or consequential damages, so the above

limitations or exclusions may not apply to you. This Limited Warranty gives you specific legal rights, and you may

also have other rights which vary from state to state.

Engineered in the U.S.A.

This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on the

product. Chef'sChoice®, EdgeCraft®, and the overall design of this product are registered trademarks of the

EdgeCraft Corporation.

Edgecraft Corporation is a subsidiary of Greenfield World Trade, Inc. d/b/a The Legacy Companies

Conforms to UL Std. 1083

Printed in China.

C20

NOTICE: