Attach The Rear Wheels - Schwinn Interval Jogger Manual De Usuario

ATTACH THE REAR WHEELS

❶ Push rear wheel into hole until it clicks into place. Pull on wheel to
make sure it is secure. Repeat on other wheel. Figure 3.4
❷ To remove rear wheels:
Lift release lever while pulling on wheel. Repeat on other wheel.
Figure 3.5 .
TIRE PRESSURE NOTE: inflate tire pressure to 35-psi. Use a
manual bike pump to inflate tires. NEVER use an air compressor
to fill tires with air (like those used at gas stations).
5
1
Figure 3.4
2
Figure 3.5