Basic Use; Turning The Tv On Or Putting It In Sleep Mode; Source Selection; Volume Control - Listo 24HD-CAC842 Instrucciones De Uso

Turning the TV on or putting it in sleep mode

This television is either on or in sleep mode. It cannot be completely shut down. If you are not
going to use your TV for a long period of time, unplug the mains adapter.
- To turn on the TV
Make sure that the mains plug is plugged in.
Press
(Power) on the remote control or the POWER button on the TV. The power indicator
turns green.
- To put the TV in sleep mode
Press the (Power) button on the remote control or the POWER button on the TV. The power
indicator turns red.

Source selection

Setting the volume
Press the VOL + or - button on your remote control to adjust the volume according to preference.
If you want to mute the sound, press the
cancel this function.

Programme selection

Press the CH+ or CH- buttons on the remote control to change channels.
You can go straight to the TV channel you want by pressing the 1, 2, 3... buttons on the remote
control. To select channel 12 for example, press the 1 key followed by the 2 key.
V.1.0

BASIC USE

Once the external systems are connected to your television, you can switch
between your different input sources: DTV, ATV, AV, SCART, Component,
HDMI, PC, Media.
Press the SOURCE button on the remote control.
Then use the  or  buttons on the remote control to highlight an entry
and press the ENTER button on the remote control to confirm.
(Mute) button on your remote. Press
78
again to