Rear Panel Overview - Akai Professional SynthStation49 Guia De Inicio Rapido

REAR PANEL OVERVIEW

1. POWER INPUT – Connect a
6V DC – 3A power adapter
(center pin positive) to this
jack then into an electrical
outlet.
2. POWER SWITCH – Turns
SynthStation49 on or off.
3. USB PORT – Plug a standard USB cable (not included) into this port and into the USB port of your
computer. When connected to your Mac or PC, SynthStation49 can be used as a USB-MIDI controller.
SynthStation49 is class-compliant, so it is "plug-and-play" – no separate driver installation is necessary.
4. MAIN OUTPUTS – Connect a speaker system or other output device to these outputs using standard
1/4" cables. Adjust the level of these outputs with the MASTER VOLUME knob.
5. SUSTAIN PEDAL INPUT – Connect a 1/4" TS sustain pedal (sold separately) to this input.
6. HEADPHONE OUTPUT – Connect 1/8" stereo headphones to this output. You can adjust level of this
output with the MASTER VOLUME knob.
TROUBLESHOOTING
If you encounter any issues related to delayed, incorrect, or lack of software response, try one of the
following solutions:
•
Completely exit and close the SynthStation app, making sure it is not still running in the background
(i.e., Multitasking) then open the app again.
•
Disconnect then reconnect your iPad to SynthStation49.
•
Confirm that your iPad is properly connected to SynthStation49. To do this, go to Settings
About in your iPad, then scroll to the bottom of the page. "SynthStation49" should be shown.
•
Turn your iPad off then on again, and reopen the SynthStation app.
•
Turn SynthStation49 off then on again. (If you are powering it via its USB connection, disconnect then
reconnect it to your computer. Also, try connecting SynthStation49 to a USB port on your computer
rather than a USB hub.)
•
Delete the SynthStation app from your iPad then re-download it. (Be sure you have backed up the app
on your computer before deleting it from your iPad.)
APPS
The Akai SynthStation app is not included. To purchase it, visit www.synthstationapp.com, or go to the
iTunes App Store and search for "SynthStation."
For a complete list of other apps that support SynthStation49, visit www.synthstationapp.com.
SPECIFICATIONS
Note keys:
Pads:
Inputs/outputs:
Power:
Dimensions:
Weight:
49 (velocity-sensitive)
9 (velocity-sensitive)
2 1/4" main outputs
1 1/8" stereo headphone output
1 USB port
1 1/4" sustain pedal input
6V DC, 3A, center pin positive
29" x 13" x 7.5" / 737mm x 330mm x 191mm
(W x D with dock down x H with dock up)
7.5 lb / 3.4kg
6 4
4
5 3 1 2
General