Install The Air Conditioner - GE AHD06 Manual Del Propietário

Installation Instructions

4. INSTALL THE AIR CONDITIONER

IN THE WINDOW
A. Measure the width of the window opening and
mark the center line on the inside window sill.
Center line
For model AHD06:
Place the unit in the window. Lower the window
sash to hold unit in place.
B. Set the air conditioner in the window so that is
centered. Place the air conditioner so that front
edge of the bottom mounting rail is against the
back edge of the sill.
Make sure that the air conditioner is level or tilting
slightly to the outside.
Top Rail
Sill
12
Cut and apply weather
strip to front and
bottom edge of window
frame.
Cut and apply weather
strip to back edge of
the window sill
Lower
Window Sash
Bottom Rail
4. INSTALL THE AIR CONDITIONER
IN THE WINDOW (continues)
C. Install the side bracket into the unit and into the
window sill using two 1" wood screws provided.
Repeat on other side.
D.
window.
Mark the location of the holes in each corner of
side panels in place.
49-7778