Care And Cleaning; Air Filter; Cleaning The Front Panel - GE AHD06 Manual Del Propietário

Care and Cleaning

Cleaning the Air Filter
The air filter is removable for easy cleaning. A clean air filter
helps remove dust, lint and particles from the air for optimal
cooling operating efficiency. The Filter Reset light will turn
on to notify you that the air filter must be cleaned. The light
goes on after the air conditioner has been operating for 240
hours.
1. Turn off the air conditioner and unplug the power supply
cord from the outlet.
2. Remove the air filter by opening the front panel and
removing the air filter. Some models may have a filter
that slides out instead and does not require opening of
the front panel.

Cleaning the Front Panel

1. Turn off the air conditioner and unplug the power supply
cord from the outlet.
2. Clean the front panel with a soft cloth. Do not use
chemical cleaners, especially spray cleaners, sharp
instruments, or flammable fluids. These products can
damage the surface of your air conditioner.
3. Air-dry the front panel completely.
4. Plug the power supply cord in the outlet and turn on the
air conditioner.
8
the air filter. If the air filter is very dirty, wash it in warm
water with mild detergent. Do not wash the air filter in
a dishwasher or clothes washer, or use any chemical
cleaners. Do not use a cloth dryer or microwave oven
to dry it. Air dry the air filter completely before placing it
back in the unit.
4. Place the air filter back in the air conditioner.
5. Close the front panel.
6. Plug the power supply cord into the outlet, turn on the air
conditioner and press the filter reset button to turn off the
indicator light.
NOTE: Do not operate the air conditioner without the filter
in place.
49-7778