Disinfecting The Humidifier - Levoit LV600HH Manual De Instrucciones

Ocultar thumbs Ver también para LV600HH:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

6. While the inner chamber is soaking, fill
the water tank half way with vinegar
then reseal the tank. Gently shake the
water tank to ensure all sides are evenly
coated. Allow the tank to soak for 30
minutes. After 30 minutes, use a soft
bristle brush (i.e., toothbrush or dish
brush) to remove any mineral buildup
inside the tank.
7. Pour out the excess vinegar from the
water tank and base and rinse all
components with cold water.
8. Allow all parts to completely dry before
reassembling the humidifier.
Disinfecting the
Humidifier
Disinfecting the humidifier removes any
remaining bacteria or mold after cleaning
both the water tank and base. It is
recommended to disinfect your humidifier
at least once a week with regular use as
well as before and after storing for long
periods of time.
1. Clean the base and water tank as
instructed in the previous section.
2. Mix 1 teaspoon of bleach with 1 gallon of
water.
3. Pour 1 cup of the solution into the inner
chamber, and pour the rest into the water
tank.
4. Allow the solution to soak for at least 30
minutes, but no longer than 1 hour.
5. Pour out the solution and rinse both
water tank and base under cold
water. Allow all parts to air dry before
reassembling.
Tips for Regular Maintenance
• Disinfect your humidifier at least once
a week if you are using it on a regular
basis. This helps prevent any bacterial
and mold growth that may occur.
• Always rinse out the water tank before
each use. Changing the water each time
you use the humidifier helps eliminate
any bacteria that may have started to
grow inside the tank.
• It is recommended to use distilled water
with the humidifier. Tap water and hard
water have a higher mineral content and
can leave a white residue around the
area where your humidifier is being used.
• Clean and drain the humidifier before
storage to prevent bacterial and mold
growth in your unit.
13
E N

Hide quick links:

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido