About This Guide
This guide gives step by step instructions for
setting up D-Link DSR-150 Services Router.
Please note that the model you have purchased
may appear slightly different from those shown in
the illustrations.
Unpacking the Product
Open the shipping carton and carefully unpack its
contents. Please consult the packing list located
in following information to make sure all items are
present and undamaged. If any item is missing
or damaged, please contact your local D-Link
reseller for replacement.
- One (1) DSR-150 Wireless Services Router
Appliance
- One (1) 12V/1.5A Power Adapter
- One (1) Console Cable (RJ45-to-DB9 Cable)
- One (1) Ethernet (CAT5 UTP/Straight Through)
Cable
- One (1) Reference CD (CD-ROM containing
product documentation in PDF format)
Product Overview
This chapter provides detailed descriptions of the
DSR-150 device and its components.
DSR-150 front panel: device status LEDs
A B
Figure 1: DSR-150 Front Panel
2 D-Link Unified Services Router
C
The LEDs reflect device current status. The power LED
(A) will keep blinking during device startup period. The
whole startup process will take around 1 minute and
device may not respond to users' requests during this
time. After startup completion, the power LED (A) will
turn to solid green. If you want to restart the device for
some instances, we recommend you waiting a couple
of few seconds between shutting down and turning
on the device. The meaning and status of each LED
indicator are shown in the below table:
LED
Item
Color
indicators
A
Power
Green
B
Internet
Green
C
LAN
Green
Table 1: DSR-150 LED Status Description
DSR-150 side view: device buttons
Figure 2: DSR-150 Side View
Status
Description
Solid
Completion of power on
Green
Light Off
The device is power-off or
during power-on process
Solid
Link is up
Green
Blinking
There are activities on
Green
this port
Light Off
Link is down
Solid
Link is up
Green
Blinking
There are activities on
Green
this port
Light Off
Link is down
A B C
D