Docking Your Computer
NOTE:
If you are docking your computer for the first time and have not completed the steps in "Setting Up Your
Media Base" on page 12, complete them before proceeding to the next step.
NOTE:
After docking the computer for the first time, the computer battery or the computer AC adapter connection
can power the media base if the media base is not connected to an AC adapter.
NOTE:
Your computer should be turned off only when you dock your computer for the first time.
1 Align the back of the computer with the back of the media base at approximately a 30 degree angle,
and lower the front of the computer onto the
2 Gently press the computer onto the
3 Turn on the computer.
The operating system recognizes the
14
Media Base Setup Guide
1
computer
media base
media base
.
media base
2
media base
until it clicks and the computer is seated.
.
1
2