Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Main Tube Burner Conversion
Tools required:
Steps：
1.
Remove the warming rack, cooking grids, and flame tamers.
2.
Remove the main tube burners by removing the pin securing the burners near the back wall of the firebox。
Gently lift the tube burners up and out.
3.
Use a 6 mm socket and wrench or 6 mm nut driver to remove the LP orifice from the end of each gas valve.
The NG orifice is located behind the LP orifice, so no additional orifice needs to be installed.
4.
Replace the tube burners and pins back into original position.
26
Natural Gas Conversion for Model# 122.33492410
Phillips Head Screwdriver (+)
6 mm Nut Driver
Needle nose pliers
Publicidad
Tabla de contenido
