Kenmore 122.33492410 Manual De Uso Y Cuidado página 28

Searing Side Burner Conversion
Tools required:
Steps:
1. Close main lid and remove the three screws which are pre-assembled to the Igniter electrode wire and
searing side burner.
2.Remove the searing side burner.
3. Remove the searing side burner LP (Liquid Propane) orifice with the 6 mm driver, and replace it
with the NG (Natural Gas) orifice, retighten, and replace the side burner to the original position.
Tighten all screws.
28
Natural Gas Conversion for Model# 122.33492410
Phillips Head Screwdriver (+)
6mm Wrench