Publicidad
Idiomas disponibles
Idiomas disponibles
Congratulations. You have just purchased a Cooper Lighting, LLC Dusk to
Dawn security light. This fixture will provide years of convenience and protec-
tion for your home or business.
Your Dusk to Dawn security light features a light sensor that automatically turns
How it works
the light on at dusk and off at dawn.
• Phillips Screwdriver
What you need
• Drill with 3/16˝ drill bit
• Adjustable wrench
• 1/2˝ diameter flexible conduit
• 1/2˝ conduit connectors
• Wire connectors
• Fixture housing (A)
What's included
• One-piece lens assembly (B)
• Bulb - 70 Watt ED17 Metal Halide
Medium Base M98 (C)
• Light sensor (D)
• Access cover (E)
• (3) Mounting screws (F)
• (2) Lens assembly lock screws (G)
• (2) Access cover mounting screws (H)
• Green ground screw (I)
• Lens bottom cover (J)
• (2) Washers (K)
• For outdoor use only.
What to know
• cULus LISTED for wet locations.
• Fixture must be connected to a 120 Volt, 60 Hz power source. Any other
connection voids warranty.
• Fixture should be installed by an electrician or persons with experience in
household wiring. The electrical system, and method of electrically
connecting the fixture to it, must be in accordance with the National Electrical
Code and local building codes.
• Always use same wattage and type of bulb that was included with the fixture.
Failure to do so will void the warranty. See fixture for wattage.
Call for customer service and/or missing or damaged parts (800-334-6871)
B
C
E
F
2
AL70MH
D
G
H
I
K
A
J
Publicidad
