HoMedics DESTRESS HHP-250TL Manual De Instrucciones E Información De Garantía página 6

Please Note:
The heat
option will
only work
while a
massage
feature is
selected.
Massage + Heat:
Once massage function is on, press the HEAT button (B) to activate
Heat
NOTE: The Heat function can only be activated when the Massage
function is in use.
NOTE: The Heat function will only activate when using the Thermal
Heat attachment. Never use the Heat Attachment if the housing is
cracked or broken, or if the metal plate is loose, bent or separated
from housing.
NOTE: To eliminate the risk of being burned, do not use the heat
continuously for more than 15 minutes. Do not use heat or cold
massage if you have sensitive skin, poor circulation, discolored areas,
burned or inflamed skin, or where skin eruptions or sores are present.
Heat and cold massage should be pleasant and comfortable. Should
pain or discomfort result, discontinue use and consult your physician.
3. Apply massager attachment lightly to the area you wish to massage.
4. Move the unit slowly, holding on the targeted area or muscle group.
Massage the area for a short period of time and move to another
area. NEVER massage the same spot longer than 3 minutes.
CAUTION – as stated in the IMPORTANT SAFETY INSTRUCTIONS
section of this manual, NEVER use this appli ance on or near eyes
or other highly sensitive areas of the body.
5. Operation of longer than 15 minutes is not recommended and may
cause overheating.
6. When massage is completed, turn unit off, allow to cool, unplug the
power cord and store properly in a dry place.
NOTE on Cold massage attachment:
The Cold attachment should be placed in the freezer for a
minimum of 2 hours prior to use for optimum performance. At room
temperature, the Cold attachment will stay cold for up to 15 minutes
of continuous massage use. As the attachment gradually loses its
frozen state over 15 minutes, gently press around the edges of the
cold gel surface to circulate the colder beads against skin.
5