Troubleshooting Tips - U.S.Robotics SureConnect 9003 Guía De Instalación Rápida

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 151
On Green
PWR
On Green/10 Mbps
On Orange/100 Mbps
ENET1
Flashing Green or
ENET2
On Green
USB
Flashing Green
On Green
ADSL
Flashing Green

Troubleshooting Tips

None of the LEDs illuminates when I turn on the router.
Check the connection between the power adapter, router, and wall
outlet.
Confirm that you're using the power adapter that came with your U.S.
Robotics SureConnect ADSL Ethernet/USB Router package.
The ADSL light is flashing or is not illuminated.
Make sure that the telephone cable connects properly at the "ADSL"
port on the rear of the router and at the phone wall jack.
I can't connect to the router's configuration utility.
Possible Solution 1:
Make sure that Ethernet or USB cables connect properly and securely.
Make sure that you've plugged in the power cord.
Possible Solution 2:
Make sure that your PC is using an IP address within the range of
192.168.1.2 to 192.168.1.254.
Make sure that the address of the subnet mask is 255.255.255.0.
Receiving power from the wall jack power supply.
Off
Detected no power.
Established and detected a physical connection
through the Ethernet cable between router and
computer.
Flowing data traffic.
Orange
Did not establish a physical connection between
Off
router and computer.
Established and detected a physical connection
through the USB cable between router and com-
puter.
Flowing data traffic.
Did not establish a physical connection between
Off
router and computer.
Established a DSL link.
Negotiating a DSL link.
Off
The DSL link failed.
13

Publicidad

Tabla de contenido
loading

Tabla de contenido