GYS PSW 600 W Traducción De Las Instrucciones Originales página 11

Translation of the original instructions
F01
Low volt
PROTECT FUNCTION AND RESTART WORK METHOD
Function
LED light
Input low Green : on
voltage alarm Red : off
Input low Green : on
voltage shut down Red : on
Input over Green : on
voltage protection Red : on
Over load Green : on
protection Red : on
Over temperature Green : on
shut down Red : on
Output short Green : on
circuit Red : on
WASTE DISPOSE
Please do not discard the products when it is useless, otherwise it will cause environmental pollution.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
PSW 600 W / 1000 W / 1500 W - 12 V /
1500 W - 12 V + RC / 1500 W - 24 V
F02
Over volt Over load
State description
alarm AC output
Alarm AC have output
Alarm No AC output
Alarm No AC output
Alarm No AC output
Alarm No AC output
Alarm No AC output
F03 F04
Over temp
When the voltage of the batter return to the
related voltage, alarm stop automatically.
When the voltage of the batter return to
the related voltage the inverter will restart
work, green light on, red light off.
When the voltage of the batter return to
the related voltage the inverter will restart
work, green light on, red light off.
Reduce the load to related rang the inverter
will restart work, green light on, red light off.
When the inside temperature return to rela-
ted rang, inverter will restart work, green
light on ,red light off.
When short circuit stopped, inverter restart
to work automatically.
F05
Output short-circuit
Restart work method
EN
11 11