Troubleshooting Guide - Rainbow SRX Manual Del Propietário

Troubleshooting Guide

Your Rainbow ® is equipped with features to sense and alert the user to abnormal conditions. The red fault light to the left of the timer lights will either illuminate solid or blink,
depending on the system affected.
A BLINKING LIGHT represents an issue with
the hose or powered accessories.
A SOLID LIGHT represents an issue with the
main canister unit.
INDICATOR
POTENTIAL CAUSE
LIGHT CODE
Blinking Light Power Nozzle brush roller
is obstructed.
Continuous Solid Light Electrical connections are wet.
Water basin is overfilled.
Operating motor temperature is high.
Main unit is not latched to
water basin.
Motor cannot spin due to debris
between motor housing and separator.
If the corrective action does not fix the problem:
Contact an Authorized Rainbow
CORRECTIVE ACTION
Turn unit off / unplug unit.
Remove debris from Power Nozzle brush roller.
Resume normal operation.
Turn unit off / unplug unit.
Dry electrical connections.
Resume normal operation.
Turn unit off / unplug unit.
Remove water basin.
Verify that water level is even with the rounded post in
the inside center of the water basin.
Turn unit off / unplug unit.
Allow unit to cool off for 5 minutes.
Check for clogged hose, filter or Power Nozzle.
Latch main unit to water basin.
Clean around the separator.
Distributor or Service Center.
®
O W N E R ' S
| 10
M A N U A L