DeWalt DE8201 Manual De Instrucciones página 10

E N G L I S H
ANGLE GRINDER GUARD FOR DIAMOND
CUTTING DISCS DE8201/DE8501
Congratulations!
You have chosen a D
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional users.
Table of contents
Technical data
Manufacturer's declaration
Safety instructions
Package contents
Description
Assembly and adjustment
Instructions for use
Maintenance
Guarantee
Technical data
Base plate
Dust extraction outlet ø
Weight
Diamond cutting disc
Diameter
No load speed
Max. thickness
Location hole
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Fire hazard.
en - 1
WALT product. Years of
DE8201 DE8501
mm 234 x 82 355 x 101
mm 35 35
kg 1.1 2.4
mm 125 230
min -1 12,220 6,600
mm 0.3 - 3.0 0.7 - 3.0
mm 22.2 22.2
Manufacturer's declaration
DE8201/DE8501
D WALT declares that this unit has been designed in
E
compliance with 89/392/EEC.
This unit must not be put into service until it was
en - 1
en - 1 established that the Power Tool to be connected to
this unit is in compliance with 89/392/EEC
en - 1
(identified by the CE-marking on the Power Tool).
en - 2
en - 2
Director Engineering and Product Development
en - 2
Horst Großmann
en - 3
en - 4
en - 4
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
Safety instructions
Observe the safety regulations in the instruction
manual of the Power Tool to be connected to this
attachment. Also observe any applicable additional
safety rules. Read the following safety instructions
before attempting to operate this product.
Keep these instructions in a safe place!
General
1 Keep work area clean
Cluttered areas and benches can cause
accidents.
2 Keep children away
Do not let children come into contact with the
tool or its attachments. Keep all people away
from the work area.
3 Dress properly
Do not wear loose clothing or jewellery. They can
be caught in moving parts. Preferably wear
rubber gloves and non-slip footwear when
working outdoors. Wear protective hair covering
to keep long hair out of the way.
10