Attaching The Fan Blades - HAMPTON BAY 68144 Guía De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly - Attaching the Fan Blades (continued)
2

Attaching the fan blades

NOTE: Your fan features revolutionary advancements
for quick and easy blade installation.
NOTE: Your fan blades are reversible. Select the
blade side finish which best accentuates your decor.
Mount the fan blades (J) to the blade bracket (I) by aligning
the three key-slot holes in the blade (J) with the three posts
on the top of the blade brackets (I).
Hold the blade (J) close to the blade bracket (I) and press
the blade (J) down firmly. Ensure the key-slot holes are
properly seated on the blade arm posts.
While still holding the blade (J) down, firmly slide the blade
(J) away from the bracket (I) side until the blade (J) engages
in the locking mechanism (SS).
Make sure the locking mechanism (SS) at the rear of the
blade bracket (I) springs upward and butts against the edge
of the blade (J) indicating a secure connection.
Visually inspect the top of the blade bracket (I) to ensure the
locking mechanism (SS) is securely in place.
Repeat for the remaining blades (J).
Assembly - Attaching the Light Kit
1
Attaching the light kit
WARNING: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
Remove the three screws (QQ) from the light kit fitter
assembly (G).
Connect the wires exiting the bottom of the motor assembly
(F) by connecting the molded adaptor plugs together (blue to
blue, and white to white).
Slide the light kit (G) and secure it to the switch housing
using the three screws (QQ) that were removed in the first
step.
12
J
I
SS
F
QQ
G

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

1001 983 097

Tabla de contenido