Intermatic IDIGITAL DT101 Manual De Instrucciones página 4

PROGRAMMING
Setting On/Off Events
1. If necessary, press the MODE button repeatedly until
the words SET ON/OFF EVENTS and EVENT 01 (or
next available event number) appear on the display. See
FIG. 9.
2. Press the ENTER/NEXT button to display ON @ or
OFF @ (depending on what you want to set).
3. Press the + or – buttons to enter the time you want to set
for your ON and OFF times.
Note: To go from AM to PM, keep pressing the + or –
buttons to cycle through the day. You can hold the
+ or – buttons down for 3 seconds to make the time
scroll quickly.
4. When you have set the event correctly, you have two choices:
– Press the ENTER/NEXT button to set the next ON/OFF event (up to 28 events).
– Press the MODE button to exit.
OPTIONAL – Deleting (Clearing) an Event
1. Press the MODE button repeatedly until the words SET ON/OFF EVENTS display.
2. Press the ENTER button as necessary to cycle through events that have been set until you see the event you want to
delete.
3. Press the + or – buttons AT THE SAME TIME to display --:--.
4. Press the MODE button to exit.
OPERATION
Operating the Time Switch
Press the MODE button repeatedly to select the desired operating mode on the display. There are two options:
• AUTO—Sets the Time Switch to turn circuits ON and OFF using the programmed time(s).
Note: Press the ON/OFF button to override programmed events and manually turn the Time Switch ON/OFF.
• MANUAL—Disables Time Switch events and the circuit using the ON/OFF button.
Edit/Review Programmed Events
Press the MODE button repeatedly to reach the desired menu. Then follow the relevant instructions in this sheet.
LIMITED ONE-YEAR WARRANTY
This warranty is extended to the original household purchaser only and is not transferable. This warranty does not apply to: (a) damage to
units caused by accident, dropping or abuse in handling, acts of God or any negligent use; (b) units which have been subject to unauthorized
repair, opened, taken apart or otherwise modified; (c) units not used in accordance with instructions; (d) damages exceeding the cost of
the product; (e) sealed lamps and/or lamp bulbs, LED's and batteries; (f) the finish on any portion of the product, such as surface and/or
weathering, as this is considered normal wear and tear; (g) transit damage, initial installation costs, removal costs or reinstallation costs.
INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES.
ALL IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL
BE OF THE SAME DURATION AS THE WARRANTY PERIOD STATED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON
THE DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased or (b) completing a
warranty claim online at www.intermatic.com. This warranty is made by: Intermatic Incorporated, Customer Service 7777 Winn Rd., Spring
Grove, Illinois 60081-9698. For warranty service go to: http://www.Intermatic.com or call 815-675-7000.
IDIGITAL — 24-Hour Digital Time Switch
MODE
SET
ON @
OFF @
ENTER
RESET
NEXT
Clear Mem
FIG. 9
4
ON/OFF EVENTS EVENT #
–
ON /
+ OFF
Clear Entry
Setting On/Off Events
Event