Using The Amplification Function - ClearSounds CSC40 Manual Del Usario

USING THE AMPLIFICATION FUNCTION
Your CSC40 Phone is equipped with a specialized amplification function designed to fit
your needs. You can adjust the volume and tone (sound frequency range) of the incom-
ing voice by simply adjusting the controls located on the right side of the phone
and using the AMPLIFY button
diagram #11)
is pressed, you will see the red light on the AMPLIFY button light up. Adjust the VOLUME
and TONE to fit the levels to your own hearing requirements.
The CSC40 Phone has an AMPLIFY button that controls the loudness & tone of the
receiver. Press the AMPLIFY button to turn the extra amplification ON or OFF. With the
AMPLIFY feature OFF , the phone volume control provides up to 15 dB of gain. Once the
AMPLIFY button is pressed, an extra level of amplification is added providing 15 to 40 dB
of gain and tone control. Adjust the volume by moving the slide control. Slide the Volume
control UP to lower the level and slide the Volume control DOWN to increase the level.
In addition to amplification, your CSC40 Phone offers the ability to adjust the Sound
Frequency Range you are amplifying. Sound Frequency Range is also called Tone
control. This allows you to adjust the sound to fit your specific hearing needs. Slide the
Tone control UP to boost the lower frequency range and slide the Tone control DOWN to
boost the high frequency range. This allows individuals with both high frequency and low
frequency hearing loss to use the CSC40 Phone. Please note: the Tone Control will only
operate once the AMPLIFY button is turned ON.
Diagram #11– Volume & Tone controls
+30db max
15dB AMPLIFY OFF
30dB AMPLIFY ON
VO LUME
Chart #2 – ClearSounds Amplification & Tone Control Chart
(See diagram #12)
Bass
0dB
+10dB max
15dB
. When the AMPLIFY button
Diagram #12 – Amplify button
TONE
Treble
+10dB max
Normal
(See
11