domoova DHV60 Manual De Usuario página 18

EN
Maintenance
Filters
Figure 1
Open the filter cover using the button on the top of the motor unit
(Figure 1). Remove the HEPA 13 block filter (Figure 2). The HEPA filter
(Figure 3) can be washed with water. First, shake it outside to remove
any small dust particles that have accumulated, then rinse it in clean
water.
NOTE:
• Make sure the HEPA block filter is completely dry before returning it to the
motor unit. If it is damaged, you are recommended to replace it to ensure that
your vacuum's filter performance is maintained.
Figure 3
16
Figure 2