Displaying The Text - Alpine KCA-420i Manual De Operación

Controling from the CVA-1004 model
1
Press FUNC.
The FUNC indicator lights.
2
Press 5 ( ) within 5 seconds.
The songs will be played back repeatedly.
REPEAT → (off) → REPEAT
(Repeat One) (Repeat One)
3
To cancel repeat play, select (off) with the
above procedure.
Controling from the IVA-D901 model
1
Press 4 (REPEAT) to play back repeatedly
the song being played.
The song will be played repeatedly.
REPEAT → (off) → REPEAT
(Repeat One) (Repeat One)
2
Press 4 (REPEAT) again and select (off) to
deactivate the repeat play.
Controling from the IVA-D300 model
1
Touch [P1/3] on the function guide to change
to [P2/3].
The function guide changes.
2
Touch [ ] and select the desired Repeat
play.
The song will be played repeatedly.
RPT → (off) → RPT
3
Touch [ ] again and select (off) to
deactivate Repeat play.
12
-EN

Displaying the Text

You can display the playlist name, or the tag information of a song
in the iPod.
The type of characters (number/letter, etc.) and the display order
differs depending on the head unit. Refer to "Displaying the Title/
Text" of the head unit's Owner's Manual.
The iPod data is displayed in the same way as MP3
data, with some minor differences.
Head Unit and iPod display indications (only the differences
are displayed)
Head Unit iPod
File No. *
Folder No.
File No. (1) Fixed display
Folder Name "----" fixed display
File Name "iPod" fixed display
Not displayed **
Frame
* The maximum file number that can be displayed is 255.
Any file beyond 255 is still displayed as 255.
** Though the numeric value displayed differs from the
actual sampling or bit rate (depending on head unit), this
is not a malfunction.
• Only alphanumeric characters (ASCII) can be displayed.
• When the artist name, album name, or song name is set on
iTunes, and the amount of characters is increased, songs
may not be played back when connected to the unit.
Therefore, a maximum of 250 characters is recommended.
The maximum number of characters for the head unit is 64
(64 byte).
• After setting the ignition to ACC, ON or OFF, or recon-
necting the iPod to the adapter, when the first song is
played back, the artist name, album name or song name
may not be correctly displayed.
• Some characters may not be correctly displayed.
• "NO SUPPORT" or "NO SUPRT" is displayed when text
information is not compatible with the adapter. (The
display differs depending on the head unit.)
Controling from the CDA-9835/CDA-9833/
CDA-9831/CDA-9830/CDA-9827/CDA-9826/CDA-
9825/CDA-9820XM/CVA-1004 models
1
Press TITLE ( ) or DISP/TITLE ( ).
The playlist name or the tag information is
displayed.