Making A Conference Call - Spracht ZuM Maestro DECT Guía De Usuario

Connecting the second and additional Headsets
1. Using the Master Headset which is already linked with
the Base, press the PAGE switch on the Base for 5s. The
Base starts searching for a Headset to pair to. Press the
second Headset's Mute button until the Headset status
LED flashes, indicating the Headset is in pairing status.
Connection will be successful when the LED turns solid on.
2. Repeat the above to connect the 3rd and 4th Headsets.

Making a Conference Call

1. Tap the Multi-Function button on the primary Headset
to connect to the Base when the audio connection
indicator is on.
2. The three secondary Headsets need confirmation
from the primary Headset before entering conferencing
mode. Press the Multi-Function button on the secondary
Headsets; you will hear a "DU" tone from the primary
Headset. Press the Multi-Function button on the primary
Headset to confirm.
3. The audio will be shared between these Headsets
after getting confirmation from the primary Headset.
4. You can now make your conference call from the
Master Headset.
Ending or leaving the conference
The primary Headset user can end the conference by
hanging up on the call. The call is ended for all Headsets.
The secondary Headset users can leave a conference by
pressing the multi-function button on their headsets, or
by docking the Headset with the base. The Conference call
is still active for the other Headset(s).
Spracht®
5