CYBEX CP-21072 Manual Del Propietário página 21

G. Ensure cables are connected properly. The power
and coax cables thread into the monitor. The
composite video cables slide into the monitor. The
RJ-45 connectors are color coded and will click into
the monitor.
H. Using a Phillips screwdriver, install the fi ve screws
that secure the back cover in place. See Figure 6.
NOTE: Ensure cables are not pinched or damaged.
Figure 6
I. Install the back cover by sliding the back cover into
the upper tab on the monitor (A). See Figure 7.
Upper Tab
A
Figure 7
J. Rotate the back cover down until it clicks into the
two tabs at the base of the monitor (A). See
Figure 7.
Back
Cover
Screws (5)
Back
Cover
Tabs
5-3