Hansgrohe Allegro E 04076 0 Serie Instrucciones De Instalación/Garantía página 4

English
Install the hose weight.
Pull out on the handspray.
If the handspray does not retract smoothly, reposition the
hose weight.
Connect the hot and cold supply hoses to the stops using
3/8" compression fittings (included).
Use two wrenches so that the hoses do not
twist.
A twisted hose may become loosened from
the faucet, which can cause a leak.
Turn on the water and check all connections for leaks.
User instructions
The water comes on in the stream mode.
Press the front of the diverter to obtain the spray mode.
Press the rear of the diverter to return to the stream mode.
4