Main Screen; Operation Mode - Saci [e]joy Manual De Instalación Y Mantenimiento

6. MAIN SCREEN

This screen will show the current status of the pump:
You can directly view the instantaneous rotational speed of the motor, the pressure of the installation (only if the
pressure transducer is installed) and the instantaneous consumption of motor. In brackets, just to the side of the
instantaneous consumption, you can see the nominal consumption of the motor entered in the start-up wizard
(point 8 of this manual).
From this screen, if you click on the keys (
cut for checking data you need view without having to access the settings menu.

7. OPERATION MODE

The purpose of all pumps designed for swimming pool cleaning is to keep the water clean and in optimum
condition. The most notable development is that with the logic of the speed variator, this process is achieved with
high energy savings.
The variator enables the operation of a pump in the installation, in addition to being able to control the automatic
activation of the pool lights and also help to clean the filter, in addition to other functions.
There is a daily setting of various filtration sequences (up to 4 sequences every day), in which the pump's operating
speed can also be indicated.
The default of pump operation mode is automatic. Once time bands and the days of the week on which filtering is
required have been indicated, the pump will filter at the speed indicated for each band. It is here where we must
take into account that the slower the operating speed, the greater the energy savings.
The keyboard includes 3 buttons identified as V1, V2 and V3, which enable timed operation of the pump at the
speed set in the corresponding parameter, in case the pump needs to be activated manually.
If there is a pressure transducer installed, the system will monitor the pressure of the installation at all times, to
warn if it detects excess soiling in the filter. Once this warning has been received, or at any other time, when the
button "BACK WASH" is pressed, a simple wizard will guide you through cleaning the filter. This wizard will tell
you to move the filter valves to cleaning mode, then rinse and finally back to filtration.
V A R I A B L E
5 0 r p
C O 1 3
F E 1 4 . 8 A A
o l e s
1 1 : 5 8
) or (
S P E E D P U M
- - B
m - a R
N ( 6 . 0 A
A A S A M e
), you can directly access the display menu. This acts a short
22
P I
N F
) A
n u
EN