Buffalo WHR-HP-G54 Guia De Inicio Rapido página 4

Ocultar thumbs Ver también para WHR-HP-G54:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
EN
Gathering Information
1
Recording the AirStation's LAN MAC Address
Before you place your AirStation, it's a good idea to record its LAN MAC
address. This will be the default SSID of your wireless network. You can find
the LAN MAC address on the bottom of the AirStation.
MAC Addresses are 12-digit codes comprised of numbers and letters. When
inputting MAC Addresses for custom configurations, a semi-colon (:) is used
to separate every two digits. ex: 00:07:40:00:00:00
The Auto/Bridge Switch on the bottom of the AirStation is used to determine
it's functionality. When set to Auto, Router mode or Bridge mode can be
selected from within the configuration screens. As default the AirStation is in
Router mode. However by flicking the switch to Bridge mode the AirStation
becomes a dedicated bridge.
The default IP Address of the AirStation differs depending on which mode
it is set to. In Router mode the default IP Address is 192.168.11.1 whereas in
Bridge mode the default IP Address is 192.168.11.100.


Publicidad

Tabla de contenido
loading

Tabla de contenido