ARDES AR5EA40PR Folleto De Instrucciones página 19

Buttons
A. Off
B. On/Speed
C. Mode
D. Timer
E. Swing
Batteries
Remote control is supplied with battery inside (CR2025 type); remove
the plastic sheet from the battery cover before use remote control. When
the battery is over, it must be replaced with the same type following the
drawing on the back of remote control.
OFF Button (A):
Press this button when the unit is on, to turn it off.
ON/SPEED Button (B):
Press this button when the unit is off to turn it on.
Press this button when unit is on to select the desired speed: low speed,
medium speed or high speed; the related indicator light of speed (X) will
turn on in the control panel.
MODE Button (C) - only from remote control:
Press this button when unit is on to select the desired mode: normal (red
indicator light of mode (Z) will turn on in the control panel), natural mode
(the indicator light of mode (Z) will turn off in the control panel) or sleeping
mode (green indicator light of mode (Z) will turn on in the control panel).
TIMER Button (D):
When the unit is operating, you can set the timer to switch the fan off
automatically after the set time. Press this button repeatedly to select the
desired time period in half hours increments from 0,5 hours to 7,5 hours.
The related indicator light of timer (0,5H, 1H, 2H, 4H) will illuminate on
the control panel. When all the indicators light are off means that timer is
not setted and the unit will continuously work until you switch off manually
the unit.
SWING Button (E) - only from remote control:
Press this button when unit is on to activate the automatic oscillation
from left to right. To deactivate the automatic oscillation press again this
button.
Indicator light
X. indicator light of speeds
Y. indicator light of timer
Z. indicator light of mode
19