Descargar Imprimir esta página

Elkay EZTL Serie Manual De Instalacion Y Uso página 5

Publicidad

EZFSTL8*1H, 2H
Versatile Wrapper and Trim Kit Installation Instructions
Left Hand Wrapper
(High Side)
1) Remove existing wrapper
by removing the (4) screws
from bottom.
2) Screw trim piece to wrapper
with (2) screws
(provided)
3) Re-install wrapper
with (4) screws.
4) Dispose of unused
cover plate.
Left Hand Wrapper
(Low Side)
1) Remove existing wrapper
by removing the (4) screws
from bottom.
2) Clip cover plate, sliding
until plate sits flush with
the wall.
3) Re-install
wrapper with
(4) screws.
4) Dispose of
unused trim
piece.
LZFSTL8*1H, 2H
EZFSDTL*1H
Wrapper Fill
Piece Location
(Left Side High)
PAGE 5
LZFSDTL*1H
Right Hand Wrapper
(Low Side)
1) Remove existing wrapper
by removing the (4) screws
from bottom.
2) Clip cover plate, sliding
until plate sits flush with
the wall.
3) Re-install
wrapper with
(4) screws.
4) Dispose of
unused trim
piece.
Right Hand Wrapper
(High Side)
1) Remove existing wrapper
by removing the (4) screws
from bottom.
2) Screw trim piece to wrapper
with (2) screws
(provided)
3) Re-install wrapper with (4) screws.
4) Dispose of unused cover plate.
Wrapper Fill
Piece Location
(Right Side High)
1000003116 (Rev. B - 08/18)

Publicidad

loading