Remove Bottle Assembly; Breast Pump Care - The First Years Quiet Expressions Manual De Instrucciones

Double Electric Breast Pump
Clean all parts prior to initial use and after each use.
Important: Do not sterilize any part of the breast pump in the microwave.
1. Always separate the 3-way adapter from breast shield before cleaning.
2. After cleaning the valve, gently lift the end of the soft rubber piece (the end with
the raised bumps) to ensure the soft rubber piece can flap freely and that it is not
stuck to the valve. If the end is stuck to the valve, wash valve again in warm soapy water.
Do not press or pull hard on the flexible flapper end.
Damage can occur if the flapper tears.
3. Wipe hose clean with clean damp cloth.
To store: Make sure pump and all components are completely dry before placing in tote bag.
If you have installed batteries, remove them prior to storing the pump for a prolonged time
period.
12 thefirstyears.com

Remove Bottle Assembly

If Using Pump Handle
1. Remove bottle assembly by pushing the release buttons.
2. Remove hose connectors from 3-way adapter.
3. Remove shield, adapter, valve and baffle for cleaning.

Breast Pump Care

Important: Place Flexi-Fit
shields in this drying position
to prevent warping.
™