Astralpool QUADRALED Manual De Instalación Y Mantenimiento página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
For this connection method, cables with appropriate sections should be used according to their length.
5. CONTROL SYSTEMS OF THE LED PROJECTORS:
Installations with QUADRALED LED spotlights only, can be controlled from the feeder itself. In installations where there are
also ColorPlus spotlights, the feeder can synchronize these spotlights with the QUADRALED LED spotlights.
5.1. Control through the feeder
The feeder is provided with a pushbutton, which is the simplest way of controlling the spotlights. Each press changes the
colour or sequence.
The pushbutton is normally closed (NC). It is connected in the terminals indicated "pushbutton input" shown in Figure 1.
With this control system you have 14 function modes: 7 fixed colours and 7 sequences with different colours.
5.1.1. Diagram of the electrical connection
In installations with more than four QUADRALED LED spotlights, which must be controlled jointly, a single pushbutton
should be installed connected in parallel to the connection terminals.
Length (m)
0-20
20-30
30-50
4
Cable section
2
2.5 mm
Cu
2
4 mm
Cu
2
6 mm
Cu

Publicidad

Tabla de contenido
loading

Tabla de contenido