Registering The Product - Zodiac pH expert Manual De Instalación Y De Uso

Ocultar thumbs Ver también para pH expert:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
Malfunction
• Buffer solution defective
• Problem on porous element
pH7 and/or
• pH sensor is worn
pH4 calibration
impossible (error
message)
or
pH sensor reliability
< 25%
Slow response of pH
pH sensor is charged electrosta-
sensor
tically

6. Registering the product

Register your product on our website:
-
be the first to be informed of new Zodiac products and special offers,
-
help us to continuously improve our product quality.
Australia – New Zealand
Europe, South Africa & Rest of the World
H0434900.A - EN - 2013-11
Possible causes
of sensor and/or deposits
• Ensure that the solution used is pH7 or pH4
• Check the pH of buffering solution using an electronic pH
tester
• Use new pH7 and/or pH4 buffering solution
• Restart calibration
• Check that the bulb on the pH sensor is not damaged or has
not dried up while out of the water.
• As a last resort, clean it by leaving sensor in a solution of
10% hydrochloric acid for a few hours.
• Check that the porous element on the sensor is in good
condition (clean with acid solution).
• Replace the pH sensor
Do not use a cloth or paper to wipe the sensor, shake it gently
www.zodiac.com.au
www.zodiac-poolcare.com
Solutions
EN
10

Publicidad

Tabla de contenido
loading

Tabla de contenido