Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Irrigation interval (1 = every day, 2 = every 2nd
day, etc.)
Standby (programming mode ended and automatic
irrigation activated)
Press the
button
mode. The hour display for start time irrigation
1 will flash. Set the hours by turning the rotary
control
.
6
Press the
button
for start time irrigation 1 will flash. Set the minu-
tes by turning the rotary control
Press the
button
for irrigation duration 2 will flash. Set the hours
by turning the rotary control
Press the
button
5
duration for irrigation 2 will flash. Set the minutes
by turning the rotary control
Note: Please note that you programme the
duration of irrigation, not the end time!
Here are some examples for possible settings /
duration of irrigation:
0:05 = 5 minutes
00:45 = 45 minutes
2:15 = 2 hours and 15 minutes
Avoid overlapping irrigation times.
The minimum irrigation duration amounts to 1 minute.
The maximum irrigation duration amounts to 23 hours
and 59 minutes.
Press the
button
5
for the irrigation interval will flash.
Set the interval by turning the rotary control
(1 = every day, 2 = every 2nd day etc.).
Press the
button
switch to standby mode. Irrigation will start au-
tomatically at the programmed time. During the
duration of irrigation the
again in programming
5
again. The minute display
5
.
6
again. The hour display
5
.
6
again. The minute display
.
6
again. The arrow display
again. The product will
5
display behind the
system time and duration of irrigation (
) will flash.
Note: By briefly pressing the
can jump back a step in programming mode to
change the programmed values.
Note: After approx. 1 minute without an entry,
the product will return to standby mode. All
values which have already been programmed
will be retained.
Manual irrigation (Fig. 30–36)
Press and hold down the
approx. 2 seconds. Manual irrigation begins as
soon as the
tem time.
To adjust the manual irrigation time press the
button
. The hour display will flash. Set the
5
hours by turning the rotary control
Press the
button
will flash. Set the minutes by turning the rotary
control
.
6
Press the
button
entry.
The set duration for manual irrigation is saved and
will be automatically adopted for the next manual
irrigation.
To prematurely end manual irrigation, press the
ON / OFF button
6
Battery status display
The
display
empty. All other displays are deactivated.
Change the batteries as described in the chapter
"Inserting / changing the batteries".
button
button
7
display flashes behind the sys-
6
again. The minute display
5
again to confirm your
5
.
8
flashes if the battery is weak or
16
or
20
23
you
8
for
.
GB/IE
21
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
