Operations And Functions; Timer Settings - TaoTronics TT-AH014 Guia Del Usuario

MAX
Installing and Removing the Floater
1. Align and insert the small notch into the small pinhole
2. Push in the large notch to secure in place

Operations and Functions

Adding water into the tank no higher than the max water level, pour 2 to 3 drops
of essential oil into the water. Connecting to a power source, the device will enter
standby mode with a beep sound.
Mist Adjustment
With power connected, press the Mist Button to switch between low / medium /
high mist modes, and turn it off, a beep sound will be heard with each press and
the corresponding indicators will light up.
Note:
1. Press and hold the Mist Button for 3 seconds to turn on the Bottom LED Light.
2. Press and hold it for another 3 seconds to turn off the light.

Timer Settings

1. Press the Timer Button to set 2 hour / 4 hour / 6 hour / 2 + 6 (8) hour and 4 + 6
(10) hour timer with a beep sound in each press. The corresponding indicators
will light up. Press a sixth time to turn off the timer.
2. When the timer is set, press and hold the Timer Button for 3 seconds to turn off
the timer at any time.
Low Water Protection
When water inside the tank is depleted, the humidi er will turn off automatically
after all the LED indicators ash three times (The Bottom LED Light will turn red if it
is on when low water protection is activated).
03/04