Installation Checks; Other Installation Options - Tait Electronics TM8100 Guia Del Usuario

Installation checks

1. Insert the fuses into the power leads.
2. TM8110 and TM8115 radios only.
3. Connect an in-line power meter between the radio and
4. TM8110 and TM8115 radios only.
Contact your radio provider for further information.

32 Other installation options

Switch on the radio to confirm that it is operational (see
"Turning the radio on and off" on page 14).
Important: Do not transmit yet.
the antenna and measure the forward and reflected
power levels.
Less than 4% of the forward power should be reflected. If
this is not achieved, check the installation, including the
antenna length.
Once the reflected power levels are within tolerance,
make a call to another party on the radio (see "Selecting
a channel" and "Making a call", on page 14).
Other installation options