Cómo Elegir Uno De Los Tres Modos De Funcionamiento; Modo Con Sonda- Pages 11; Campana Sin Sonda- Pages 12; Túnel Sin Sonda- Pages 13 - Brightwell Quantura Serie Manual De Instrucciones

Cómo elegir uno de los tres modos de funcionamiento
C
Modo con Sonda– Pages 11 & 17
Suitable for both Single tank machines and Conveyor/multi tank machines. Modo sonda offers controlled
dosing of detergent (Top up) with the use of a conductive probe. The probe can be set to dose to a
specific level of concentration and will monitor the concentration adjusting the dosage accordingly. Rinse
is controlled by a signal from the host machine and can be set to run on a timed basis (suitable for Single
tank/Door machines) or to run continuously whilst a rinse signal is present (suitable for conveyor/multi
tank machines).
Campana sin sonda– Pages 12 & 23
Suitable for single tank machines. Probeless Modo puerta sin sonda operates on a timed dosage of
Detergent (Top up), Rinse (Rinse) activated by an incoming signal from the host machine. Detergent
dosage is programmed via a time setting. Rinse dosage can be either a time setting or programmed to
run for the duration of the incoming signal. Optional delay time for rinse is available. Initial charge (Top
up) options are Signalled requiring a signal from the host machine to the Initial charge input of the PCB
(see page 12 for wiring instructions), Power up: Initial charge activates when the dosing pump is
powered for the first time, OFF no Initial charge, Auto: Using a single signal from the host machine to
operate detergent charge and rinse charge. When the signal remains high for longer than a
programmable time the dispenser will stop Detergent and Rinse charges and start The initial charge.
Túnel sin sonda– Pages 13 & 28
Suitable for Conveyor/Multi tank machines. Probeless Modo transportador sin sonda operates on a timed
dosage of Detergent (Top up), Rinse (Rinse) activated by an incoming signal from the host machine.
Detergent dosage is programmed via a time setting. Rinse dosage for the duration of the incoming signal.
Optional delay time for rinse is available. Initial charge (Top up) options are Signalled requiring a signal
from the host machine to the Initial charge input of the PCB (see page 13 for wiring instructions), Power
up: Initial charge activates when the dosing pump is powered for the first time, OFF no Initial charge,
10
© 2017 Brightwell Dispensers Limited.