Fm Radio Operation - Oxygen audio PULSION 12.1 Manual Del Usuario

NOTE: As part of the power saving mode, the unit will enter STANDBY mode
automatically after 60 minutes (approx.) of no audio output.
LED Display and charging indicator light status
Charging indicator light located at the real panel of the device.
Operation mode
Standby
battery charging
Power
OFF
with full battery
battery charging
AC mode
full battery
with power plug,
battery charging
DC mode
without power
plug
AUX mode
Bluetooth-ready for pairing
Bluetooth paired
USD/SD card mode
Recording function in USB or
SD mode
FM mode
When pressing VOL+/- keys
on Remote control
In Mute

8. FM radio operation

1. Turn on the unit and press repeatedly the MODE key on unit, or press the
FM button on remote control to select FM mode (the display will show the
frequency).
2. Press the
an automatic search for available radio stations, and the radio stations can
be saved automatically after auto-searching finished. (FM memory: a
maximum of 200 channels could be saved.)
LED light
Off
Red
Green
Red
Green
RED
Off
button on the unit or SEARCH key on remote control to start
LED Display
Off
Off
Off
logo flash
logo solid
logo flash
logo solid and display the actual
battery capacity
Screen shows "LINE"
Screen shows "BLUE",
Screen shows "BLUE",
Screen shows"USB" or "CARD", and
playing time display from "00:01".
/
Screen shows "USB" & "RECO", or
"CARD" & RECO".
Frequency shows on screen.
Screen shows volume from "000" to
"032".
LED display blink in BLUE.
- 29 -
logo flash.
logo solid.