Installing Your New Appliance - Hisense HBM17 Serie Manual De Uso Y Cuidado

Installing Your New Appliance

Before using the appliance for the first
time, you should be informed of the
following tips.
Warning!
For proper installation, this refrigerator
must be placed on a level surface of hard
material that is the same height as the rest
of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator.
The rollers, which are not castors, should
be only used for forward or backward
movement. Moving
sideways may damage your floor and the
rollers.
Ventilation of appliance
In order to improve efficiency of the
cooling system and save energy, it
is necessary to maintain good ventilation
around the appliance for the dissipation of
heat. For this reason, sufficient clear
space should be available around the
refrigerator.
Suggestion: It is advisable for there to be
at least 3 inches ( 7 5mm ) of clearance
from the back of the fridge to the wall, at
least 3 7/8 inches ( 1 00mm ) of clearance
from its top, at least 3 7/8 inches ( 1 00mm )
from its side to the wall and a clear space
in front to allow the doors to open 140°. As
shown in following diagrams.
6
the refrigerator
Hisense Refrigerator
Note:
This appliance performs
ambient temperature
(12.8 ℃ ) to 110 ℉ ( 4 3.3 ℃ ) . The appliance
may not work properly if left at a
temperature above or below the indicated
range.
Stand your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct sunlight,
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
heaters.
Leveling of appliance
For sufficient leveling and air circulating
in the lower rear section of the appliance,
well with
between 55 ℉