Installing Your New Appliance - Hisense RB327N4AD2 Manual De Instrucciones

9

Installing your new appliance

Before using the appliance for the
first time, you should be informed of
the following tips.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy, it is necessary to
maintain good ventilation around the
appliance for the dissipation of heat.For
this reason,sufficient clear space should
be available around the refrigerator.
Suggest: It is advisable for there to be
50-70mm of space from the back to the
wall,at least 100mm from its top,at
least 100mm from its side to the wall and
a clear space upfront to allow the
doors to open 135°. As shown in follow
diagrams.
100 100
135°
940
Note:
This appliance performs well within
●
the climate class from SN to T showed in
the table below.It may not work properly if
being left at a temperature above or below
the indicated range for a long period.
Climate class
SN
N
ST
T
Stand your appliance in a dry place
●
to avoid high moisture.
Keep the appliance out of direct
●
sunlight, rain or frost. Stand the
appliance away from heat sources
such as stoves,fires or heaters.
Leveling of appliance
For sufficient leveling and air
●
circulating in the lower rear section of
the appliance, the bottom feet may
need to be adjusted.You can adjust
them manually by hand or by using a
suitable spanner.
To allow the doors to self-close, tilt the
●
top backwards by about 10mm .
Ambient temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C