Audio / Video Connections; A/V Connections - Sanyo DP42840 Manual Del Usuario

GETTING STARTED

AUDIO / VIDEO CONNECTIONS

Digital Audio Output is used to hookup a
multichannel receiver with the use of a phono-
type digital audio cable.
COMPONENT connections will accept SDTV,
EDTV and HDTV video signals. Use them for
great image quality from digital devices such
as a DVD player or Video Game system.
MULTICHANNEL
RECEIVER
DVD PLAYER
(or similar device)
DVI
SATELLITE RECEIVER
(or similar device)
Use HDMI INPUT1, 2 & 3 to hookup
HD digital devices such as a Blu-ray
player, HD Cable Box, HD Satellite
Receiver or Video-game System.
COMPOSITE connections are used to hookup
your analog equipment such as a VCR or an
older DVD player.
NOTE: Always match the color of your device's output
S-Video connection can replace the yellow
Video connection for enhanced video.
Audio Output L/R are used to hookup an
external stereo Amplifier. (Do not connect
external speakers directly to the HDTV)
PC INPUT is used to hook up your PC or
Laptop and use your HDTV as a computer
monitor. See page 16 for details.
USB FLASH
HDMI (DVI) INPUT1 can be used to
hookup a DVI device with the use of
an appropriate DVI to HDMI cable or
adapter. (VIDEO3 Audio In L/R jacks
need to be hooked up to the DVI
device as well.)
NOTE: Audio/Video cables are not supplied
www.sanyoctv.com
Need help?
jack, the connector and the HDTV's input jack.
USB input jack is used to
connect a USB mass storage
device to
images (JPEG only.)
DRIVE
VCR
(or analog device)
STEREO
AMPLIFIER
watch digital
7
1-800-877-5032