Hdmi Properties - Marmitek CONNECT 421 Modo De Empleo

ADVANTAGES
• Suitable for simultaneously connecting 4 HDMI sources to your TV. You only need 1
HDMI input and will no longer need to change cables over.
• For connecting gaming computers such as PlayStations and Xbox, Blu-ray Players,
satellite receivers and all other HDMI devices.
• Supports HDMI v1.4 features; all 3D formats, Audio Return Channel (ARC) and
HDMI Ethernet Channel (HEC).
• With digital audio output (Toslink and Coaxial) so you can connect your A/V
Receiver directly.
• With built-in repeater and equalizer for correcting any signal loss, allowing you to
connect up to 15 metres of HDMI cable to the output.
• Switches automatically to the correct HDMI input and/or with the remote control.
• No interruptions because solid metal, interference-free, top quality housing is used.
• HDMI certified by ATC (Authorized Test Centers).
• Meets HDCP norms (High-bandwidth Digital Content Protection).

HDMI PROPERTIES

• Video bandwidth 250 MHz (enables image to be provided in 1080p, 12-bit and 60Hz)
• 3D (suitable for use with your own 3D equipment).
• Deep Color 36-bit (billions instead of millions of colours, better reproduction of
subtle gradation variances and higher contrasts).
• Active CEC (Consumer Electronics Control), operate multiple devices at the same
time with just one push on the button.
• ARC (Audio Return Channel), synchronises image and sound of your HDTV and
sends it back via the Digital Audio output to your A/V Receiver.
• HEC (HDMI Ethernet Channel), makes it possible to share an internet connection
with your (HD)-TV.
• Dolby TrueHD & DTS HD Master Audio (high quality audio support).
• Lip-Sync (prevents synchronisation problems between image and sound).
INSTALLATION
1. Connect the HDMI cable to your screen (TV, monitor or projector) to the 'HDMI
output' of the Connect 421™.
4 © MARMITEK