Technical Specifications - Marmitek CONNECT 421 Modo De Empleo

No proper 3D picture
• Check whether the HDMI source has been set to 3D and/or that this is set to
automatic.
• Both the HDMI source as well as the HD screen must support the same 3D formats.
• Check whether the proper 3D picture is reproduced by directly connecting the
HDMI source to the screen with an HDMI cable.
CEC function does not work
Check if the connected equipment supports the CEC functionality.
Every brand has its own name for this CEC function:
Anynet+ (Samsung); Aquos Link (Sharp); BRAVIA Link and BRAVIA Sync (Sony); HDMI-
CEC (Hitachi); E-link (AOC); Kuro Link (Pioneer); CE-Link and Regza Link (Toshiba);
RIHD (Remote Interactive over HDMI) (Onkyo); RuncoLink (Runco International);
SimpLink (LG); HDAVI Control, EZ-Sync, VIERA Link (Panasonic); EasyLink (Philips); and
NetCommand voor HDMI (Mitsubishi).
HEC/ARC function does not work
Check whether these functions are supported by your other HDMI equipment.
Do you have other questions that have not been resolved by the above information?
Please go to www.marmitek.com

TECHNICAL SPECIFICATIONS

Resolution
Supported HDTV Resolutions
Supported PC Resolution (max.)
Supported 3D formats
Maximum Pixel Frequency (max.)
Maximum Bit Rate (max.)
Inputs and outputs
HDMI Input (19-pin female)
HDMI Output (19-pin female)
HDMI Ethernet
Digital Audio Output
Stereo Audio Output
Maximum HDMI cable length
Remote control
Infrared remote control
CONNECT 421™
480p, 576i, 576p, 720p, 1080i, 1080p
1920 x 1200
1080p@23.98/24 Hz, 720p@59.94/60/50 Hz
250 MHz
7.5 Gbps (2.5 Gbps per channel)
1 x HDMI (front), 3 x HDMI (back)
1 x HDMI
1 x Ethernet
1 x optical (Toslink), 1x coaxial (RCA)
1 x stereo jack 3.5mm
15 meters
Including battery CR2025
7