Press any key in order to interrupt the alarm
for 24 hours. You will be woken at the same
time the next day.
Or press the MIN and SEC keys
simultaneously in order to deactivate
the alarm function entirely (bell symbol
disappears).
If you do not press a button, the alarm
switches off automatically after 1
minute. You will be woken again the
next day.
Resetting the timer
If apparently false values are being shown on
the display, you can reset the timer to factory
settings. It should then function normally again.
For this purpose, a small opening is located on
the rear side of the timer, which is labelled with
RESET.
1. Stick a thin object (e.g. an unwound
paperclip) into the opening.
2. Remove the object from the RESET opening
when a peep tone sounds.
36
TD 1600 / 1601