Symmons Identity 6703 Manual De Operación Y Mantenimiento página 4

Installation
Note:
For valve body installation, please
see valve body manual.
1) Install shower mounting plate (N)
to shower valve. Secure with two
screws (M).
N
M
M
2) Attach shower escutcheon (L) to
shower mounting plate (N).
L N
Note: Tabs should snap into place.
3) Install dome cover (K) to shower
valve by turning clockwise.
K
4) Install shower handle (I) to shower
valve. Secure shower handle with
set screw (J).
I
J
Note: Handle should be facing the 6
o'clock position.
5) Install tub spout (O) to pipe tting
Turn clockwise to tighten.
O
6) Install wall ell (B) to pipe tting.
Tighten set screw (D) to secure.
B
D
4
7) Place mounting plate (C) in
position, mark and drill 3/16" holes
for tile anchors (P1), 5/16" holes
for drywall anchors (P2). Install
anchors.
P1
P2
2
Note: For dry wall 1/2" thick or less,
insert anchor tool (P3) into drywall
anchor (P2) to secure behind wall
prior to installing wall cradle.
8) Remove cover of hand shower
cradle (E). Install cradle and
mounting plate (C). Secure with
three screws (F). Replace cover on
hand shower cradle.
2
C
P2
P3
E
C
F